High Performance Air Suspension Pressure Switch - Adjustable differential air pressure switch – Anxin

Short Description:

Product Detail

Product Tags

Feedback (2)

We rely upon strategic thinking, constant modernisation in all segments, technological advances and of course upon our employees that directly participate in our success for Heat Pump Pressure Switch, Differential Pressure Transducer, Low Pressure Transmitter, If you are interested in any of our products and services, please don't hesitate to contact us. We are ready to reply you within 24 hours after receipt of your request and to create mutual un-limited benefits and business in near future.

High Performance Air Suspension Pressure Switch - Adjustable differential air pressure switch – Anxin Detail:

Electrical parameters	5(2.5)A 125/250V
Pressure setting	20pa~5000pa
Applicable pressure	Positive or negative pressure
Contact resistance	≤50mΩ
Maximum breakage pressure	10kpa
Operating temperature	-20℃~85℃
Connection size	Diameter 6mm
Insulation resistance	500V-DC-lasted 1min,≥5MΩ
Control Method	Open and close method
Electric strength	500V—- lasted 1min, no abnormality
Installation method	Recommended for vertical installation
Applicable medium	Non-hazardous gas, water, oil, liquid
Protection level	IP65
Wiring	Soldering, socket terminal, crimping screw
Switch function	Normally open (open in free state), normally closed (closed in free state)

model	Pressure range	Differential pressure/return value	Setting error	Optional accessories
AX03-20	20-200pa	10pa	±15%	1 meter trachea 2 connectors 2 sets of sockets
AX03-30	30-300pa	10pa	±15%
AX03-40	40-400pa	20pa	±15%
AX03-50	50-500pa	20pa	±15%
AX03-100	100-1000pa	50pa	±15%	Trachea 1.2 meters 2 connectors 3 sets of sockets
AX03-200	200-1000pa	100pa	±10%
AX03-500	500-2500pa	150pa	±10%
AX03-1000	1000-5000pa	200pa	±10%

The differential pressure switch is a special pressure control switch, which is based on the mutual pressure difference between various components, and transmits information through electrical signals to control the closing or opening of the switch.The valve body of the differential pressure switch and the travel switch are assembled on a bottom plate. Under the action of pressure, the grease enters the right cavity of the differential pressure switch valve body piston from the main pipe B, and the main pipe A is unloaded.Once the pressure difference between the two main pipelines reaches the set value, the piston overcomes the spring force in the left cavity and moves to the left, and pushes the travel switch to close the contact, and sends a pulse signal to the system electric control box to order the reversing valve to change direction.At this time, the main pipe A is compressed, and B is unloaded. The piston is centered under the action of the spring in the two-end cavity, the stroke switch contacts 1 and 2 are disconnected, and the contact bridge is in the neutral position.

The system starts the second cycle. Once the pressure difference between the main pipeline A and B reaches the set value again, the piston moves to the right, the stroke switch contacts 3 and 4 are closed, and the pulse signal again causes the reversing valve in the system to change direction. Start the next cycle of work.

The differential pressure switch can be widely used in large, medium and small air-cooled or water-cooled chillers using plate heat exchangers, tube heat exchangers and shell and tube heat exchangers for water flow control and water pump and water filter status monitoring .It is also used in gas detection, non-corrosive media, absolute pressure measurement, gauge pressure, and is widely used in air conditioning and clean room, fan and filter blowing control, fluid and liquid level control.

The application of the differential pressure switch in the HVAC system is mainly controlled according to the resistance and flow curve of the HVAC equipment, the water side heat exchanger in the HVAC (tube-in-tube type, shell-and-tube type, tube-plate type and commonly used plate heat exchanger) , Water filters, valves and pumps have their pressure drop and flow performance curves. As long as the measured pressure difference on both sides of the pressure difference switch is compared with the preset value, the flow can be accurately controlled.

Product detail pictures:

Related Product Guide:

We also offer product sourcing and flight consolidation services. We've got our personal factory and sourcing office. We can easily present you with almost every style of merchandise linked to our merchandise range for High Performance Air Suspension Pressure Switch - Adjustable differential air pressure switch – Anxin , The product will supply to all over the world, such as: Morocco, Sao Paulo, Jersey, They are sturdy modeling and promoting effectively all over the world. Never ever disappearing major functions within a quick time, it's a have to in your case of fantastic good quality. Guided by the principle of "Prudence, Efficiency, Union and Innovation. the corporation. ake an excellent efforts to expand its international trade, raise its organization. rofit and raise its export scale. We have been confident that we've been going to have a bright prospect and to be distributed all over the world in the years to come.

Ac Binary Switch