Name
China air condition compressor and heat pump high low pressure switch
Applicable medium
Air conditioning refrigeration medium, water, gas, oil, etc.
Pressure setting range
-100kpa~10Mpa In this range, the equipment in the factory is carried out according to customer requirements, and cannot be changed after leaving the factory.
Contact form
Normally open, normally closed, single pole double throw
Contact resistance
≤50MΩ
Medium temperature
High temperature resistant product...
NAME
High And Low Pressure Pressure Switch/Two state pressure switch/Air conditioning refrigeration pressure switch/R134a pressure switch
MODEL
HFC-134a
PRESSURE VALUE
High pressure:3.14Mpa/2.65Mpa、Low pressure:0.196Mpa (This value can be customized according to your requirements )
Thread size
1/8 、 3/8 (Thread size can be customized according to your requirements )
Inserting type
Two inserting pieces( can be welded with the wire and has a sealing sleeve )
Scope of use
R1...
Ceramic pressure sensor module
Name: Voltage type ceramic pressure module
Supply voltage:5/5~16/5~36VDC
range:0~1…1.6…2…3…5…10…20…30MPA
output signal:0.5~4.5V
Response time:<2MS
Measuring medium
Compatible with ceramic water, gas or liquid
long term stability
≤±0.5%FS/year
Operating temperature
-40~125℃
Storage temperature
-40~130℃
Zero temperature coefficient
Typical: ±0.03%FS/℃; Maximum: ±0.05%FS/℃
Sensitivity temperature coeffic...
Product name: Wring sealed pressure switch used for air tank / horn / suspension rated85/105/110/145/165/200/90/120 PSI
Protection level: IP65
Pressure range:-100kpa~10Mpa
Control form: normally open, normally closed
Electrical connection: wire type and insert type, this switch is wire type, it can also be made into insert type
Interface type: Threaded connection or pagoda head interface. The interface thread can be set according to the user’s installation requirements
Working voltage: ...
Setting range of pressure value:-100kpa~10Mpa
Contact form: normally closed (H) normally open (L)
Contact capacity: AC250V/3A DC 3~48V, 3A
Contact resistance: ≤50mΩ.
Insulation resistance: ≥100MΩ between the terminal and the shell under DC500V.
Dielectric strength: AC1500V lasts 1min without breakdown
Compressive strength: 4.5Mpa10min without bursting.
Air tightness: 4.5Mpa1min without leakage.
Service life: 100,000 times.
Adaptation temperature: ambient temperature -30℃~+80℃, medium temper...
Setting range of pressure value:-100kpa~10Mpa
Contact form: normally closed (H) normally open (L)
Contact capacity: AC250V/3A DC 3~48V, 3A
Contact resistance: ≤50mΩ.
Insulation resistance: ≥100MΩ between the terminal and the shell under DC500V.
Dielectric strength: AC1500V lasts 1min without breakdown
Compressive strength: 4.5Mpa10min without bursting.
Air tightness: 4.5Mpa1min without leakage.
Service life: 100,000 times.
Adaptation temperature: ambient temperature -30℃~+80℃, medium temper...
1. Product name: Pagoda Head Insert Type Water Pump Air Pump Pressure Switch, high quality through CE, ROSH certification
2. Pressure control range::0-10MPA
3. Pressure value: According to customer requirements
4. Interface type: pagoda head interface, can be equipped with air pipe
5. Interface material:Galvanized iron
6. Interface size: 6.35mm diameter
7. Connection mode: insert piece, insert piece can be welded with wire, wire tail can be equipped with connector.
8.Size of inserting piece:...
Ceramic pressure sensor module
Name: Voltage type ceramic pressure module
Supply voltage:5/5~16/5~36VDC
range:0~1…1.6…2…3…5…10…20…30MPA
output signal:0.5~4.5V
Response time:<2MS
Measuring medium
Compatible with ceramic water, gas or liquid
long term stability
≤±0.5%FS/year
Operating temperature
-40~125℃
Storage temperature
-40~130℃
Zero temperature coefficient
Typical: ±0.03%FS/℃; Maximum: ±0.05%FS/℃
Sensitivity temperature coeffic...
Name
Current/Voltage Pressure Transmitter
Shell material
304 stainless steel
Core category
Ceramic core, diffused silicon oil-filled core (optional)
Pressure type
Gauge pressure type, absolute pressure type or sealed gauge pressure type
Range
-100kpa…0~20kpa…100MPA (optional)
Temperature compensation
-10-70°C
Precision
0.25%FS, 0.5%FS, 1%FS (comprehensive error including non-linear repeatability hysteresis)
Operating temperature
-40-125℃
Safety overload
2 times full sca...
Product name: Wring sealed pressure switch used for air tank / horn / suspension rated85/105/110/145/165/200/90/120 PSI
Protection level: IP65
Pressure range:-100kpa~10Mpa
Control form: normally open, normally closed
Electrical connection: wire type and insert type, this switch is wire type, it can also be made into insert type
Interface type: Threaded connection or pagoda head interface. The interface thread can be set according to the user’s installation requirements
Working voltage: ...
1.Working pressure range: -100kpa~10Mpa, Parameter setting: The start and stop value of the pressure switch can be set according to customer requirements. All parameters are set in the factory , and cannot be adjusted after leaving the factory. If you need to adjust, please select the adjustable pressure switc
2. Bursting pressure: 34.5Mpa
3. Ambient temperature: -30℃~+80℃
4. System medium temperature: -50℃~+120℃, Contact form: normally open, normally closed, single pole double throw, Elec...
Conventional
Number value
Remark
Pressure range
-100kpa…0~20kpa…100MPA (optional)
1MPa=10bar1bar≈14.5PSI1PSI=6.8965kPa1kgf/cm2 = 1atmosphere 1atmosphere ≈ 98kPa
Overload pressure
2 times full scale pressure
Breaking pressure
3 times full scale pressure
Precision
0.25%FS、0.5%FS、1%FS (Higher precision can be customized )
Stability
0.2%FS/year
Operating temperature
-40-125℃
Compensation temperature
-10℃~70℃
Compatible media
All media compatible with 304/316 st...